您好,歡迎訪問無錫合達電子設備有限公司官網!
0510-83212339
138-6181-2138
無錫合達電子設備有限公司
您的位置:首頁 > 新聞動態 > 行業知識
聯系我們

無錫合達電子設備有限公司

地址:無錫市惠山區恒新路3號
電話:138-6181-2138

咨詢熱線138-6181-2138

廠家介紹高溫老化房的特點和注意事項

發布時間:2018-12-12人氣:58

高溫老化房性能特點:采用庫板單元組合,內容積可任意放大,拆裝容易,老化房可依客戶需要尺寸設計,并配合顧客擴廠時的遷移。科學的空氣流通設計,避免任何死角,使室內溫度分布均勻。每個老化房產品都根據客戶的要求訂做,保證了設備的適用性和高效、節能。極高的穩定性及實用性。完美的外觀、合理的設計。使用的安全及高可靠性。超靜音。可擴展性。

Performance characteristics of high temperature aging room: using the combination of warehouse plate units, the content area can be arbitrarily enlarged, easy to disassemble and assemble, the aging room can be designed according to the size of customers'needs, and cooperate with the migration of customers when expanding the factory. Scientific air circulation design, avoid any dead angle, so that indoor temperature distribution is even. Every aging property is customized according to the requirements of customers, which ensures the applicability, high efficiency and energy saving of the equipment. Extremely high stability and practicability. Perfect appearance and reasonable design. Safety and high reliability in use. Super quiet. Extensibility. 高溫老化房的安全預防

Safety Prevention of High Temperature Aging Room

1、在使用電氣動力時,必須事先檢查電開關,馬達以及機械設備各部分是否安置妥善。

1. When using electric power, it is necessary to check in advance whether the electric switch, motor and mechanical equipment are properly installed.

2、始工作時和停止工作時,必須將開關徹底扣嚴和拉下。

2. When starting and stopping work, the switch must be completely fastened and pulled down.

3、在更換保險絲時,要按負荷量,不得加大或以銅絲代替使用。

3. When replacing the fuse, the fuse shall be replaced by copper wire according to the load, and shall not be increased or replaced by copper wire.

4、嚴禁用濕手、濕布或鐵柄毛刷等去清掃和擦拭電閘刀、電插梢等,防止觸電。

4. It is strictly forbidden to use wet hands, wet cloth or iron handle brushes to clean and wipe switch knives, electrical plugs, etc. to prevent electric shock.

5、凡電氣動力設備過熱時,應立即停止運轉。

5. When the electric power equipment is overheated, it should stop running immediately.

6、凡使用110伏以上電源裝置,儀器的金屬部分必須安裝地線。

6. Ground wires must be installed in the metal part of the instrument when using power supply devices above 110 volts.

7、易燃、爆炸、易揮發性物質試樣的試驗及儲存

7. Test and Storage of Flammable, Explosive and Volatile Substances

8、腐蝕性物質試樣的試驗及儲存

8. Testing and Storage of Corrosive Substances

9、生物試樣的試驗或儲存

9. Testing or Storage of Biological Samples

10、強電磁發射源試樣的試驗及儲存

10. Testing and Storage of Samples from Strong Electromagnetic Emission Sources

辛苦整理!轉載請注明來自 http://www.vnmgex.live/show.asp?id=112

推薦資訊

138-6181-2138
黑龙江11选5任选5码最大遗漏